Back to Products

61130 Red Wing Temperate FR Coverall

  • Flame Resistant Garment
Print Print PDF
FEATURES:
  • Two chest pockets with concealed zip closure
  • Gas detector and pen pocket on left sleeve
  • Two side pockets with hidden exterior-to-interior access through pocket lining
  • Adjustable snaps on cuffs and ankle openings
  • Action back pleats for freedom of movement and comfort
  • Two back pockets, one with flap
  • Tool pocket on right leg
  • 2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
  • Concealed two-way, black high density polyester coil zips with brass snap closure
  • Concealed snaps on cuffs and ankle openings
MATERIAL:
Daletec®, (Quality 30, 503551), FR 98% Cotton, 2% Carbon, 10.5 oz/yd²/350 g/m²
SIZES:
34: RG, ST, TL, XT 64: RG, ST, TL, XT 44: RG, ST, TL, XT 54: RG, ST, TL, XT 66: RG, ST, TL, XT 32: RG, ST, TL, XT 62: RG, ST, TL, XT 42: RG, ST, TL, XT 52: RG, ST, TL, XT 56: RG, ST, TL, XT 38: RG, ST, TL, XT 36: RG, ST, TL, XT 68: RG, ST, TL, XT 58: RG, ST, TL, XT 48: RG, ST, TL, XT 46: RG, ST, TL, XT 60: RG, ST, TL, XT 70: RG, ST, TL, XT 40: RG, ST, TL, XT 50: RG, ST, TL, XT
INTERNATIONAL STANDARDS:
EN ISO 11612, EN 1149-5, IEC 61482-1-2, Class 1
COLORS:
Tan, Petro Blue, Navy Blue, Royal Blue, Red, Graphite Gray, Orange
DESCRIPTION:

This coverall has a classic look and a great fit. It features eight pockets and non-sparking YKK® zips throughout. 100% brass press studs are covered on the inside, so no brass comes in contact with your skin. Major seams are double- or triple-stitched and stress points are bar-tacked for strength. 2" wide reflective FR striping added for better visibility and safety. Garments with reflective striping applied to shoulders is equal in length on the front and back.

Fitting Chart
About daletec®
CLOSE

DALETEC®

This flame retardant material is tested for resistance against flame flash and electrical arcs under realistic conditions. This strong yet comfortable product has the properties of cotton, including absorption and transport of moisture. Workwear made with Daletec® material can also be specified with optional antistatic properties. Daletec fabrics have been third party certified to meet the requirements of EN 531.